Emulex Computer Drive 355 사용자 설명서
![Emulex](https://files.manualsbrain.com/attachments/a9f06904df68a16969329cee0d321b3316fb4c39/common/fit/150/50/630eec64b37fa4951c28d41e544ee407b01af1301ac246d0d1b2a6860802/brand_logo.jpeg)
I
N
S
PEED
™ SAN S
TORAGE
S
WITCH
M
ODEL
355
C
HAPTER
1 I
NTRODUCTION
U
SER
’
S
G
UIDE
1
C
HAPTER
1
I
NTRODUCTION
This guide is designed to provide users with the necessary information to install and manage the
InSpeed™ SAN Storage Switch Model 355 for use in Fibre Channel applications in typical entry-level
Storage Area Networks (SANs).
InSpeed™ SAN Storage Switch Model 355 for use in Fibre Channel applications in typical entry-level
Storage Area Networks (SANs).
O
VERVIEW
The InSpeed™ SAN Storage Switch Model 355 is designed for entry-level Storage Area Networks
(SANs), which provide the following advantages over direct attached storage:
(SANs), which provide the following advantages over direct attached storage:
•
Greater application availability
•
Higher performance between servers and storage devices
•
Improved storage asset utilization
•
Lower storage management and support costs
•
Incremental scalability to keep up with difficult to estimate storage growth
This switch is ideal for storage pooling and consolidation, high-performance shared tape library backup
and recovery, server clustering, and streaming rich media applications.
and recovery, server clustering, and streaming rich media applications.
Enclosed in a 1U, half-rack form factor enclosure, the switch is built around the InSpeed™ SOC 320 and
is controlled by firmware loaded into the on-board Flash.
is controlled by firmware loaded into the on-board Flash.
The switch is designed as a central interconnect following the ANSI FC-AL standard. Devices are
connected to the switch through Small Form-factor Pluggable (SFP) transceivers and cables. Each
attached node has 1 or 2 Gigabits per second (Gb/s) of Fibre Channel bandwidth. The switch operates
at full switching bandwidth that reaches speeds of 4 Gb/s per port and up to 48 Gb/s of aggregate
bandwidth.
connected to the switch through Small Form-factor Pluggable (SFP) transceivers and cables. Each
attached node has 1 or 2 Gigabits per second (Gb/s) of Fibre Channel bandwidth. The switch operates
at full switching bandwidth that reaches speeds of 4 Gb/s per port and up to 48 Gb/s of aggregate
bandwidth.
Complete switch configuration and management is available through the intuitive, graphical-based Web
Manager interface. A variety of network configurations are easily established using the switch’s Port
Smart Settings, One-Step Zoning, Automatic Trunking, and Load Balancing features. In addition, the
switch features granular change notification management, retained system configuration parameters,
and a Command Line Interface (CLI) for advanced users.
Manager interface. A variety of network configurations are easily established using the switch’s Port
Smart Settings, One-Step Zoning, Automatic Trunking, and Load Balancing features. In addition, the
switch features granular change notification management, retained system configuration parameters,
and a Command Line Interface (CLI) for advanced users.
Note: Important safety, electromagnetic compatibility, and regulatory information is contained in the
Safety & Regulatory Guide. The installation and use of this product must be in accordance with
the information provided in that guide.
the information provided in that guide.