EMCO Enterprises Automobile Parts 5707070-A 사용자 설명서
3-2
Troubleshooting and Customer Support
5707070-A
Advanced Energy
®
Flow Meter Troubleshooting Tables
Follow these tables in sequential order for the best use. Answer the heading question
in bold at the beginning of each section before continuing on to the next section.
in bold at the beginning of each section before continuing on to the next section.
STATUS OF UNIT POWER
Is the unit receiving power? (Is the green Power light on?)
.
below.
Table 3-1. Status of unit power troubleshooting checklist
Question/ Possible Cause
Corrective Action
Is AC or BATTERY (DC)
power properly connected to the
processor board?
power properly connected to the
processor board?
Ensure that input power is properly connected.
.
Is the battery charged if you are
using BATTERY (DC) power,
or is the AC power cord plugged
in if you are using AC power?
using BATTERY (DC) power,
or is the AC power cord plugged
in if you are using AC power?
If you are using DC battery power, make sure your battery
is charged and that the power cables are securely
connected.
is charged and that the power cables are securely
connected.
If you are using AC power, make sure your AC power is
plugged in.
plugged in.
and
for more information.
Is the power switch on the
display panel on?
display panel on?
Ensure the power switch on the front display panel is in the
On position.
On position.
for the location of this
switch.
Is the A/C Select voltage selector
set correctly?
set correctly?
Make sure that the A/C Select switch is in the proper
location for your system input power (115 VAC or
230 VAC).
location for your system input power (115 VAC or
230 VAC).
and
the location of the switch.