EMCO Enterprises Automobile Parts 5707070-A 사용자 설명서
5707070-A
Specifications and Reference Information
4-1
Chapter
Sono-Trak™ Doppler Ultrasonic Flow Meter
Chapter
4
Specifications and Reference
Information
Information
The following sections provide specification and accessory information for the Sono-
Trak™ Doppler ultrasonic flow meter, as well as useful pipe and conversion
information.
Trak™ Doppler ultrasonic flow meter, as well as useful pipe and conversion
information.
PERFORMANCE SPECIFICATIONS
Table 4-1. Performance specifications
Description
Specification
Fluid conditions
Measured fluid
Homogenous liquids with Newtonian flow profiles (sludges,
slurries, sewage, wastewater, and other fluids containing
suspended particles)
slurries, sewage, wastewater, and other fluids containing
suspended particles)
State of flow
Axis-symmetric flow in pipe filled with fluid
Fluid type
Liquids containing suspended particles of at least 35 ppm at
40 microns at 0.2% density of undissolved solids or air bubbles
40 microns at 0.2% density of undissolved solids or air bubbles
Measurable fluid
temperature range
temperature range
-40 ºF to 300 ºF (-40 ºC to 149 ºC)
Velocity range
0.1 fps to 50 fps (0.04 mps to 15.25 mps)
Flow sensitivity
0.01 fps (0.04 mps)
Piping conditions
Pipe diameter range
Velocity indication: 0.5" to 300" (13 mm to 7620 mm) diameter
Volumetric indication: 0.5" to 100" (13 mm to 2540 mm)
diameter
diameter
Pipe
Including but not limited to: carbon steel, stainless steel, ductile
iron, cast iron, FRP, PVC, fiberglass, teflon, and most concrete
lined or coated pipes
iron, cast iron, FRP, PVC, fiberglass, teflon, and most concrete
lined or coated pipes
Pipe lining
Including but not limited to: tar, epoxy, mortar, rubber, teflon,
PVC, and glass
PVC, and glass