Emerilware 20010 사용자 설명서
10
Refitting the central unit:
• Put the lid on your work surface in the position indicated on.
Place the unit back into place. See Fig. 9.
• Check that the open/close knob is in the "Open" position .
• Push the moving parts (flaps) of the lid outwards. See Fig. 9.
• Position the central unit on the lid. Turn over the whole lid
• Push the moving parts (flaps) of the lid outwards. See Fig. 9.
• Position the central unit on the lid. Turn over the whole lid
while holding the open/close knob. Then use a coin to tighten
the nut inside the lid.
the nut inside the lid.
Remove the seal
• Remove the seal from the lid and clean with a sponge in warm
water and liquid dishwashing detergent.
• To refit the lid seal: turn the lid over so that the interior
surface is visible and fit the seal as shown in the diagrams. See
Fig. 10 and 11.
Fig. 10 and 11.
• Change the seal if it is cracked or nicked, or if the seal is no
longer effective.
Tips to help keep the cooker in perfect condition:
• Avoid overheating the pan while empty.
Brown stains and scratches may appear after prolonged use,
but these will not affect the cooker's performance.
but these will not affect the cooker's performance.
Fig 9
Fig 10
Fig 11
C A R E A N D C L E A N I N G