Edirol R-09 사용자 설명서

 

Troubleshooting

 

• Sound becomes distorted if the input level is too high. Set the input level to an appropriate 

value.

 

 

• Recording is not possible if there is insufficient remaining time. The remaining recording time 

is shown in the display in recording-standby mode. There is no remaining time if 00:00:00 is 

shown. Check the amount of free space on the memory card.

 

 

• Recording is not possible if the memory card is not inserted properly. The display shows “No 

Card” when the memory card is not recognized. Turn off power and re-insert the memory 

card.

 

 

• If the memory card is not formatted, the memory card is not recognized, and the display 

shows “SD unformatted.” Format the memory card.

 

 

• Recording is not possible if the write protect (LOCK) feature is turned on. Unlock the write 

protect feature.

 

 

• Recording cannot be performed correctly if the input level set with the [INPUT LEVEL buttons] 

is too low. Set a proper input level.

 

 

• When using an external microphone, connect it properly to the [MIC Input Jack]. Also check 

the [EXTERNAL MICROPHONE TYPE Switch] settings.

 

 

• Memory cards must be formatted on the R-09 to operate properly. Memory cards formatted 

on a PC may have the wrong format type. In these cases, the recording may stop 

immediately after starting, or a proper recording may not be possible.

 

 

• The R-09 records in stereo. Even if a monaural microphone is connected and the [EXTERNAL 

MICROPHONE TYPE Switch] is set to “MONO,” a stereo song with the same sound 

recorded on both the L and R tracks is created.

R-09_e.book 89 ページ ２００６年４月６日　木曜日　午後４時５１分