Crestron electronic C2N-DAP8RC 사용자 설명서
Digital Audio Processor with Room Control
Crestron C2N-DAP8RC
56
• Digital Audio Processor with Room Control: C2N-DAP8RC
Operations Guide - DOC. 8187A
Typical Connection Diagram when Uploading
1. Open the Crestron Viewport.
Either launch the stand-alone version of Viewport, or start SIMPL
Windows and from the menu bar, select Tools | Viewport.
Windows and from the menu bar, select Tools | Viewport.
2. Refer to the figure after this step. From the Viewport menu, select
Setup | Communications settings (alternatively, press Alt+D) to open
the “Port Settings” window.
the “Port Settings” window.
Setup | Communications Settings Command
3. Select
RS-232 as the connection type. Verify that an available COM
port (COM 1 is shown after this step) is selected, and that all
communication parameters and necessary options from the “Port
Settings” window are selected as shown after this step. Click the OK
button to save the settings and close the window.
communication parameters and necessary options from the “Port
Settings” window are selected as shown after this step. Click the OK
button to save the settings and close the window.