Crestron electronic TPS-GA-TPI 사용자 설명서
Isys
®
G-Series Touchpanel Interface
Crestron TPS-GA-TPI
10
• Isys
®
G-Series Touchpanel Interface: TPS-GA-TPI
Operations Guide – DOC. 6501
Connectors, Controls & Indicators (Continued)
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
13
RGBHV IN (1 – 2)
(2) DB15HD female, RGB (VGA) inputs;
Analog Formats: RGBHV, RGBS and RG
Analog Formats: RGBHV, RGBS and RG
S
B
Input Resolution, Non-interlaced: 640x480
minimum to 1600x1200 maximum;
Horizontal Frequency: 31.5 to 100 kHz
Vertical Frequency: 60 to 85 Hz (60 Hz limit
at 1600x1200)
Standard HD15 connector configured to
optimize performance.
minimum to 1600x1200 maximum;
Horizontal Frequency: 31.5 to 100 kHz
Vertical Frequency: 60 to 85 Hz (60 Hz limit
at 1600x1200)
Standard HD15 connector configured to
optimize performance.
2
PIN
SIGNAL
PIN
SIGNAL
1
Red
9
No
Connect
2
Green
10
Ground
3
Blue
11
No
Connect
4
Reserved
12
Monitor
Sense
5
Ground
13
Horizontal
Synch
6
Red
Ground
14
Vertical
Synch
7
Green
Ground
15
Monitor
Sense
Clock
8
Blue
Ground
14
VIDEO IN (1 – 2)
(2) sets of (3) BNC female connectors
comprises (2) video inputs,
Dynamically configurable under system
control as (1) auto-detecting component
(YP
comprises (2) video inputs,
Dynamically configurable under system
control as (1) auto-detecting component
(YP
b
P
r
), S-Video (Y/C), or composite video
input
Formats: 480i (NTSC), 576i (PAL), 480p,
576p, 720p and 1080i;
Horizontal Frequency: 15 to 45 kHz
Vertical Frequency: 50 to 60 Hz
Formats: 480i (NTSC), 576i (PAL), 480p,
576p, 720p and 1080i;
Horizontal Frequency: 15 to 45 kHz
Vertical Frequency: 50 to 60 Hz
1. Interface connectors for NET port is provided with the unit.
2. Refer to the Crestron website or contact Crestron for the latest firmware capabilities and device
2. Refer to the Crestron website or contact Crestron for the latest firmware capabilities and device
support. Connect to external touchscreen via part number 4501251 (supplied) or CNPS-602,
CNSP-616, CNSP-617, CNSP-621 or CNSP-622 (available separately—call Crestron).
CNSP-616, CNSP-617, CNSP-621 or CNSP-622 (available separately—call Crestron).
3. The TPS-GA-TPI can be powered via the 24 VDC jack OR the NET port. Be sure to use a Crestron
approved power supply as another may cause damage.