Crestron electronic TPS-GA-TPI 사용자 설명서

Crestron TPS-GA-TPI  

Isys

®

 G-Series Touchpanel Interface

•  37 

 

•  The ID code specified in the SIMPL Windows program must match the Net 

ID or IP ID of each unit. 

  Program Manager is the view where programmers “program” a Crestron control 

system by assigning signals to symbols. The symbol can be viewed by double 
clicking on the icon or dragging it into Detail View. Each signal in the symbol is 
described in the SIMPL Windows help file (F1). 

Touchpanel or display screens should be created in VT Pro-e to allow accessing the 
embedded applications, switching of source signals to desired outputs as well as 
selection of the system mode. There are no special programming requirements to use 
the functions of the TPS-GA-TPI in a room-control system.  

The single most-advanced VT Pro-e high-performance programming technique 
involving the TPS-GA-TPI is the concept of multi-mode objects. A multi-mode 
object (i.e., button, legend, etc.) is an object drawn on a VT Pro-e page that can have 
one or more active and inactive visible settings (modes). 

For examples, refer to http://www.crestron.com/downloads/example_programs.asp 
and search for Multi-mode object examples. This file contains the VT Pro-e interface 
files and SIMPL Windows files that illustrate the high-performance capabilities of 
multi-mode objects. 

The TPS-GA-TPI interfaces are capable of producing (via headphone jack) or 
transmitting (via QuickMedia) audio messages as system prompts and responses. 
These files are recorded as WAV files on a PC using an audio utility such as Sound 
Recorder that is packaged with Microsoft Windows 95/98/Me/XP/NT/ 2000™. Files 
from other sources may also be converted to an acceptable format by using this or a 
similar utility. Many other audio utilities are available commercially or as shareware. 
The TPS-GA-TPI interfaces only accept the following WAV file format: PCM, 
8KHz, mono, 8-bit. For more information about how to use Sound Recorder, refer