Fusion Electronics Car Stereo System MS-AV700 사용자 설명서

다운로드
페이지 72
42
Volume limit
This feature is useful to limit the volume level to prevent excessive noise levels 
in specific Zones.
 
To specify the volume limit for the selected Zone:
a.
  Select the Volume Limit menu item.
b.  Turn the Encoder to adjust the volume limit for the selected Zone.
c.  Press any key to exit
Sub-woofer level
External amplifiers are required to add up to 4 subwoofers to the system
A single screen is used to set the sub-woofer level for all Zones.  
You can access the screen:
•  directly from any input source screen by pressing and holding down the
 Encoder, or
•  from a selected Zone’s Sub level menu item, as described below.
 
To specify the sub-woofer level for the selected Zone:
a.  Select the Sub level menu item. The Sub level screen is displayed with 
     the first Zone highlighted.
b.  Turn the Encoder to adjust the sub level for the highlighted Zone.
c.  If required, press the Encoder to accept the sub level and move
     automatically to the next Zone.
d.  Press any key to exit
 
Name
Initially, the Zones are named Zone 1–4, but you can give each zone a name 
of your choice (up to 10 characters in length). The available characters include
all the uppercase letters, all the lowercase letters, space and numbers. While 
changing the Zone name, you can:
•  Exit without saving any changes: press the Menu key.
•  Exit and save any changes: press and hold down the Encoder.