Funai FDP-100 사용자 설명서
36
Appendix
If Errors have Occurred...
Error Messages
When connecting with a camera:
If an error (such as print error) has been detected when connecting with a camera, the error
message is displayed on the LCD monitor of the camera.
message is displayed on the LCD monitor of the camera.
z
The following is an example of error messages.
z
Error messages vary in some measure by the camera models.
z
Some cameras may have no error messages displayed on the LCD monitor.
When connecting with a computer:
If an error (such as print error) has been detected when connecting with a computer, the error
message is displayed on the computer monitor.
message is displayed on the computer monitor.
Monitor Display Examples
Status of the Printer/Solution
Page
No paper
z
The printer has no paper in the Paper tray.
Set paper in the Paper tray.
Set paper in the Paper tray.
Wrong paper/ribbon
z
Specified paper or Ink ribbon is not set.
Check that the specified paper and Ink
cartridge are set.
Check that the specified paper and Ink
cartridge are set.
The ribbon cartridge is
depleted
depleted
z
The Ink ribbon in the Ink cartridge has been
consumed. Insert a new Ink cartridge.
consumed. Insert a new Ink cartridge.
Mismatch between printed
data and loaded paper
data and loaded paper
z
Paper in the Paper tray or the Ink cartridge
does not match the printing data. Use the
specified paper or Ink cartridge for the
printing data.
does not match the printing data. Use the
specified paper or Ink cartridge for the
printing data.
No ribbon cartridge
z
The printer has no Ink cartridge. Insert the
Ink cartridge all the way in the Ink cartridge
slot until it clicks.
Ink cartridge all the way in the Ink cartridge
slot until it clicks.
No paper cartridge
z
The printer has no Paper tray. Insert the
Paper tray into the printer firmly.
Paper tray into the printer firmly.
Paper stack
z
Paper jam has occurred. Turn off the printer
and turn on again, so the paper is discharged
from the printer.
and turn on again, so the paper is discharged
from the printer.
Wrong paper tray/paper
z
Specified paper is not set. Set the specified
paper into the Paper tray.
paper into the Paper tray.
Marker detect error
z
Remove the Ink cartridge and take up the
slack. Then insert it again.
slack. Then insert it again.