Fujitsu Network Hardware V01 사용자 설명서
Chapter 4 Troubleshooting
IP-900 Series
115
Code
Name
Description
Details (The part after the * mark is not displayed.)
I002
HDMI input down
HDMI input signal not detected
−
*I002
HDMI input down recovery
Normal HDMI input
−
I003
Analog input down
Analog video input signal not detected
−
*I003
Analog input down recovery
Normal analog video input
−
I011
Video input synchronization error
Video input PLL synchronization error
occurred
occurred
−
*I011
Video input synchronization error
recovery
recovery
Recovered from video input PLL
synchronization error
synchronization error
−
I021
Input data error (*8)
Count-up occurred in the performance
statistics error counter
statistics error counter
#xxxxxxxxxxxxxxxx
* 64-bit hexadecimal number. For the meaning of each
bit, see Table 3-12, "Input data error bit format".
* 64-bit hexadecimal number. For the meaning of each
bit, see Table 3-12, "Input data error bit format".
*I021
Input data error recovery (*8)
Recovered from count-up of the
performance statistics error counter
performance statistics error counter
−
E001
Power error (*1)
Power failure occurred
#1 * Power failure on CNT board
#2 * Power failure on COD board
#2 * Power failure on COD board
E003 Temperature
error
occurrence (*5)
Extreme temperature (shutdown processing
started)
started)
* Details are as follows:
#1/#2: Number of the temperature sensor that has
detected a temperature error
t1: Temperature indicated by temperature sensor 1
t2: Temperature indicated by temperature sensor 2
xxx: FAN rotational speed
#1/#2: Number of the temperature sensor that has
detected a temperature error
t1: Temperature indicated by temperature sensor 1
t2: Temperature indicated by temperature sensor 2
xxx: FAN rotational speed
E004
Flash ROM error (*1)
Internal flash ROM access error occurred
/dev/mtd0 to 15
* Displays the occurrence range of access error.
* Displays the occurrence range of access error.
E00A
Flash ROM check sum error (*1)
Operation data error detected in internal
Flash ROM
Flash ROM
Software
bundle software
configuration
configuration#1∼#10
* Displays the occurrence range of check sum errors.
bundle software
configuration
configuration#1∼#10
* Displays the occurrence range of check sum errors.
E010
FAN error (*2)
FAN error (low speed) or stopped
xxxRPS * xxx: FAN rotational speed
*E010
FAN error recovery (*2)
FAN speed recovery
xxxRPS * xxx: FAN rotational speed