Corinex Global Powerline Router 사용자 설명서

4    

Appendix A: Troubleshooting

You  may  contact  the  Corinex  "help  desk"  by  sending  an  e-mail  to: 

-  describing your problem 
-  reporting the devices types and manufacturing numbers of your
   network devices 
-  giving us a phone number under which you may be reached, inclusive a
   convenient time to call.

Computer networking can sometimes be "tricky" when many components 
must work together for the ultimate network system to function properly. 
With  the  right  tools  the  problems  are  usually  easy  to  fix.  The  following 
tools,  available  on  your  computer  or  on  the  Corinex  CD,  will  get  you 
started.

•  Setup Tool (from the Corinex Powerline Router Installation CD)
•  Ping (from the command/terminal prompt, see chapter 6)
•  ipconfig (WinNT/2000/XP), winipcfg (Win9x/Me) (from the command
    prompt)

1. Check that the power LED on the Powerline side labeled LINK (L) on all 
devices are on, if not:
•  Check the AC cables.
•  Make sure the AC outlet is working by plugging something else into it. 
If this works, try another outlet. If this fails as well, try 2. – 4.

2. Check the Ethernet cables:
The 

Corinex Powerline Router has a LED on the Ethernet side labeled 

Link/Act. If it is not on:
•  Check if the device at the other end of the Ethernet cable is switched 
on.
•  Try a different Ethernet cable.