Fujitsu DX60S2 사용자 설명서
ETERNUS DX60 S2 Disk storage system User’s Guide -Site Planning-
4
Copyright 2012 FUJITSU LIMITED
P3AM-5492-04ENZ0
About this Manual
Organization
This document is composed of the following four chapters:
●
This chapter describes the main components and the relative optional products that are
installed in the ETERNUS DX60 S2 Disk storage system.
installed in the ETERNUS DX60 S2 Disk storage system.
●
This chapter describes the installation specifications, the installation environment, and the
power requirements.
power requirements.
●
This chapter describes the configuration for each interface to connect to the ETERNUS DX60
S2 Disk storage system.
S2 Disk storage system.
●
This chapter describes the requirements for rack installation.
This chapter also describes the standard installation rules (installation locations and installa-
tion order) of the optional products before shipment from the factory when the optional prod-
ucts are purchased with the ETERNUS DX60 S2 Disk storage system at the same time.
This chapter also describes the standard installation rules (installation locations and installa-
tion order) of the optional products before shipment from the factory when the optional prod-
ucts are purchased with the ETERNUS DX60 S2 Disk storage system at the same time.
Naming Conventions
■
Abbreviations used in this manual
•
"ETERNUS DX Disk storage system" refers to the ETERNUS DX60 S2 Disk storage system.
•
"Host Bus Adapter (HBA)" refers to the interface module normally used by the server to
connect to the ETERNUS DX Disk storage systems.
A "FC card", "LAN card", "Network Interface Card (NIC)", or "SAS card" may be used instead,
depending on the server and interface.
connect to the ETERNUS DX Disk storage systems.
A "FC card", "LAN card", "Network Interface Card (NIC)", or "SAS card" may be used instead,
depending on the server and interface.
•
Trademark symbols such as ™ and ® are omitted in this document.