Contax U4R 사용자 설명서
EN-139
Viewing images on a Windows PC
1
Insert the memory card into the camera.
(Æ p.30)
2
Place the camera in the USB cradle and
connect the AC adapter.
3
Use the USB cable supplied with the camera to connect the
USB cradle holding the camera to the PC, then start the PC.
A
Important
• If you are using Windows 98 or Windows 98SE, install the USB drivers before connecting the
USB cable. (Æ p.137)
• If you are using Windows Me, Windows 2000 or Windows XP, you do not need to install the
USB drivers. Connect the USB cable without installing the drivers.
• To view images on your PC, you must have image-viewing software already installed. (To play
movies, QuickTime 4.1 or later is required.)
• Always use the AC adapter when you connect the camera to a computer to view and copy
images, etc. If the battery runs out and the camera turns off, files may be corrupted.
• To view movies that have a large number of pixels or a high frame rate, first copy the movie to
your PC and then play the copy of the movie. If you use your PC to play back a movie that is
stored on a memory card loaded in the camera, the data transfer rate may be too slow for the
movie to play smoothly.
stored on a memory card loaded in the camera, the data transfer rate may be too slow for the
movie to play smoothly.
A
Important
You cannot view images on the PC unless there is
a memory card in the camera.
a memory card in the camera.
B
Note
A
Important
Check the sizes of the USB connectors. Plug the small connector into the USB cradle
and the large connector into the USB port on your PC.
and the large connector into the USB port on your PC.