Contax U4R 사용자 설명서
EN-154
3
Use the D-connector cable to connect the
USB cradle holding the camera to the
television, then turn the television on.
4
Turn the camera on.
Images are displayed on the television.
The table below shows the operations that can be performed during
playback.
The table below shows the operations that can be performed during
playback.
Displaying Information (File No Display)
«Applicable images: Still images / movies»
You can check information such as the filename and number of pixels of an
image during playback.
image during playback.
1
Move the selector lever up u while
playing back an image.
The information for the displayed image appears.
A
Important
Push the D3 connector cable on until the clips on
the right and left sides of the D3 video connector
click into place.
the right and left sides of the D3 video connector
click into place.
Operation
Description
Selector lever up u
Switches to the File No display.
(Æ p.24)
(Æ p.24)
Selector lever left l
Displays images in reverse order.
Selector lever right r
Displays images in forward order.
A
Important
• The LCD monitor turns off while the D-connector cable is connected.
• Images may sometimes not be displayed correctly on a television.
• Images may sometimes not be displayed correctly on a television.
B
Note
[M] and [y] are displayed for movies and still images with postrecorded audio.
B
Note
• Refer to p.24 for details of the screen displayed.
• Press the MENU button K when information is displayed to return to the normal
• Press the MENU button K when information is displayed to return to the normal
playback screen.
100–KICX_0001 2272X1704 2004.09.01 12:34:56