Contax U4R 사용자 설명서
EN-38
Using the Cleaning Pad
Attach the cleaning pad to the strap as shown in the illustration.
Clean the lens and LCD monitor with the side to which the cleaning cloth is attached.
Clean the lens and LCD monitor with the side to which the cleaning cloth is attached.
When cleaning the lens, remove the lens hood before wiping the lens with the cleaning pad.
To remove the lens hood, grip the hood with your fingertips and turn it counterclockwise.
To remove the lens hood, grip the hood with your fingertips and turn it counterclockwise.
Attaching the Filter Adapter
Remove the lens hood, then attach the filter adapter by turning it clockwise.
Use commercially available 28mm diameter filters.
Use commercially available 28mm diameter filters.
A
Important
• The filter adapter is only for use with filters. Do not attach conversion lenses or any
other component that is not a filter.
• Do not use the flash (Flash Off mode). The correct exposure cannot be obtained.
• Depending on the type of filter, exposure and focusing may be affected. Please verify
• Depending on the type of filter, exposure and focusing may be affected. Please verify
before use.
• When removing the lens hood, take care not to touch the lens directly.
• Take care not to lose the lens hood.
• Take care not to lose the lens hood.