Conceptronic C300BRS4 사용자 설명서

Conceptronic C300BRS4 

 

 

 

 

                            User Manual 

3 

 

 
To install and use the Wireless Broadband Router you need a computer equipped with an Ethernet 
port (such as an Ethernet NIC) and a web browser

.  

 

Any computer that uses the Wireless Broadband Router must be able to connect to it through the 
Wireless Ethernet (WLAN) on the Wireless Broadband Router. This connection is a Wireless Ethernet 
(WLAN or WiFi) connection and therefore requires that your computer be equipped with a Wireless 

Ethernet Adapter as well. Many notebook computers are now sold with a Wireless Ethernet Adapter 
already installed. There is also a Wired Ethernet port that is used to connect the WLAN adapter to 
your wired network. This port can be used to configure the Wireless Broadband Router.  Most fully 
assembled desktop computers come with an Ethernet NIC adapter as standard equipment. If your 
computer does not have an Ethernet port, you must install an Ethernet NIC adapter before you can 

configure the Wireless Broadband Router. If you must install an adapter, follow the installation 
instructions that come with the Ethernet NIC adapter. 
 

The Wireless Broadband Router uses an HTML-based web interface for setup and management. The 
web configuration manager may be accessed using any operating system capable of running web 
browser software.  

 

Any common web browser can be used to configure the Wireless Broadband Router using the web 
configuration management software. The program is  designed  to  work  best  with  more  recently 

released browsers such as Microsoft Internet Explorer® version 6.0, Netscape Navigator® version 
6.2.3, or later versions. The web browser must have JavaScript enabled. JavaScript is enabled by 
default on many browsers. Make sure JavaScript has not been disabled by other software (such as 
virus protection or web user security packages) that may be running on your computer.