Fluke ScopeMeter 196 사용자 설명서

38

To obtain a more detailed view of a waveform, you can
zoom in on a waveform using the 

function.

To zoom in on a waveform, do the following:

Display the 

key labels.

Observe that the trace is frozen,

HOLD 

appears at the top of the

screen, and the waveform is
magnified.

Enlarge (decrease the time/div)
or shrink (increase the time/div)
the waveform.

Scroll. A position bar displays the
position of the zoomed part in
relation to the total waveform.

Observe that the bottom of the waveform area displays
the zoom ratio, position bar, and time/div (see Figure 22).
The zoom range depends on the amount of data samples
stored in memory.

From this point you can use the cursor function for further
measurements on the waveform.