FMC Corporation - Talstar 80 사용자 설명서
Operation
Proline Promass 80 PROFIBUS PA
36
5
Operation
5.1
Quick operation guide
The user has a number of options for configuring and commissioning the device:
1.
Local display (option)
The local display enables you to read all important variables directly at the measuring point,
configure device-specific parameters in the field and perform commissioning.
configure device-specific parameters in the field and perform commissioning.
2.
Operating programs
The configuration of profile and device-specific parameters is primarily done via the PROFIBUS
interface. You can obtain special configuration and operating programs from various
manufacturers for these purposes.
interface. You can obtain special configuration and operating programs from various
manufacturers for these purposes.
3.
Jumpers/miniature switches for hardware settings
– Configuring the device address
– Configuring the device address
You can make the following hardware settings using a jumper or miniature switches on the
I/O board:
• Device bus address configuration (for hardware addressing)
• Hardware write protection enabling/disabling
I/O board:
• Device bus address configuration (for hardware addressing)
• Hardware write protection enabling/disabling
a0001318
Fig. 25:
Methods of operating PROFIBUS PA
1
Local display for device operation in the field (option)
2A
Configuration/operating programs (e.g. FieldCare) for operation via PROFIBUS PA
2B
Configuration/operating program for operating by means of the FXA193 service interface (e.g. FieldCare)
3
Jumper/miniature switches for hardware settings (write protection, device address)
2A
3
1
Esc
E
-
+
Esc
E
+
-
XXX.XXX.XX
Esc
E
-
+
FXA193
2B