Clarion NX404 빠른 설정 가이드

다운로드
페이지 33
28
NX404
English
Quick start guide
5. This unit has a fan motor in the back of the 
main unit so as not to raise the temperature 
in the source unit. When the fan motor vent 
is covered with cords or mounting bracket, 
it may cause a malfunction. Be sure not to 
cover it when wiring cords.
5. Installing the Main Unit
This unit is designed for fixed installation in the dashboard.
1. When installing the main unit in NISSAN vehicles, use the parts attached to the 
unit and follow the instructions in Figure 5. 
When installing the main unit in TOYOTA vehicles, use the parts attached to the 
vehicle and follow the instructions in Figure 6.
2.  Wire as shown in Section 7.
3.  Reassemble and secure the unit in the dashboard and set the face panel and 
center panel
Figure 4
For NISSAN vehicle
Mounting Screw Holes (Side View of the Main Unit)
For TOYOTA vehicle
Installing the Main Unit in NISSAN Vehicle
Figure 5
 Spacer (thickness: 1mm)
(Not attached to the main 
unit)
6- Flat head screws
(M5x8)
(Attached to the main unit)
Trim ring
(Not attached to 
the main unit) 
Mounting bracket
(1 pair for the left and right sides)
Main Unit
Vehicles other than NISSAN and TOYOTA
In some cases the center panel may require modification. (Trimming, filing, etc.)
• Removing the Main Unit
When the main unit is to be removed, disassemble it in the reverse of the order in 
“INSTALLING THE MAIN UNIT”.
NX404_quick start guide_EN_InDesign.indd   28
2014-1-14   14:18:43