Citroen C5 사용자 매뉴얼

175

vi

3

Before positioning the

jack :

always adjust the

vehicle’s

ground

clearance to the “maximum

height” position and retain

this adjustment for as long

as the jack is under the vehi-

cle (do not use the hydraulic

adjustments).

immobilise your vehicle on

horizontal, stable and non-

slippery ground.

Ensure that any passengers

have left the vehicle and are

in a safe place.

never get underneath the vehi-

cle if it is supported only by

the jack.

The jack and all of the tools

are specific to your vehicle.

Do not use them for any other

applications.

have the original wheel repaired

and refitted as soon as possi-

ble.

-

-

-

rEmOval

1 Park the vehicle on stable,

firm ground that is not slippery.

Apply the parking brake.

C H A N G I N G A W H e e L

2 If your vehicle is equipped with

“Hydractive III+” suspension,

with the engine running at idle,

adjust the ground clearance to

its maximum height. see chap-

ter “Hydractive III+ suspen-

sion”.

3 switch off the ignition and

engage first gear or reverse

gear depending on any slope

(for a vehicle with automatic

gearbox, select position P).

If your vehicle is fitted with

“Hydractive III+” suspension,

position the chock, whichever

direction the gradient may be

in, in front of the front wheel

diametrically opposite to the

one to be replaced.

5 Position the jack at one of the

four jacking-points provided

on the subframe close to the

wheels, then use the handle to

unwind the jack until it reaches

the ground.

6 Remove the protector from

each bolt using tool

3.

7 slacken the wheel bolts.

8 Continue to extend the jack until

the wheel is a few centimetres

off the ground.

9 Undo the bolts, remove the

wheel.