Carson Medical Alarms Horn System 사용자 설명서
HPK-150 Installation and Operating Instructions
Page 3 of 8
CP5061A
02/05/10
INSTALLATION
Proper installation of the system is essential for years of safe, reliable operation. Please read all
instruction before installing the system components. Failure to follow these instructions can
cause serious damage to the components or vehicle and may void warranties.
instruction before installing the system components. Failure to follow these instructions can
cause serious damage to the components or vehicle and may void warranties.
SAFETY PRECAUTIONS
For the safety of the installer, vehicle operator, passengers and the community please observe
the following safety precautions. Failure to follow all safety precautions and instructions may
result in property damage, injury or death.
Qualifications - The installer must have a firm knowledge of basic electricity, vehicle electrical
systems and emergency equipment.
the following safety precautions. Failure to follow all safety precautions and instructions may
result in property damage, injury or death.
Qualifications - The installer must have a firm knowledge of basic electricity, vehicle electrical
systems and emergency equipment.
Mounting - Mount the unit for easy access by the vehicle operator. DO NOT mount in air bag
deployment area. Assure clearances before drilling in vehicle.
Wiring - Use wiring capable of handling the current required. Make sure all connections are tight.
Route wiring to prevent wear, overheating and interference with air bag deployment. Install and
check all wiring before connection to vehicle battery.
Testing - Test all horn system functions after installation to assure proper operation. Test vehicle
operation to assure no damage to vehicle.
Keep These Instructions - Keep these instructions in the vehicle or other safe place for future
reference. Advise the vehicle operator of the location.
deployment area. Assure clearances before drilling in vehicle.
Wiring - Use wiring capable of handling the current required. Make sure all connections are tight.
Route wiring to prevent wear, overheating and interference with air bag deployment. Install and
check all wiring before connection to vehicle battery.
Testing - Test all horn system functions after installation to assure proper operation. Test vehicle
operation to assure no damage to vehicle.
Keep These Instructions - Keep these instructions in the vehicle or other safe place for future
reference. Advise the vehicle operator of the location.
UNPACKING
Inspect contents for shipping damage. If found alert carrier immediately.
Contact supplier immediately if any components are missing.
Contents of box should include the following items:
Contact supplier immediately if any components are missing.
Contents of box should include the following items:
Qty Item
1 Amplifier Unit (HA-150-10 14)
1 Speaker, 100W 11 ohm (CSP-100B)
1 Switch Panel (SP-200)
4 Screw, Hex #8 Self Drilling (CP4051-XK-12)
6 Terminal, 3/16” Insulated Fem. Q.C. (CP4062-K2545)
1 Instruction Manual (CP5061 This Manual)
1 Speaker, 100W 11 ohm (CSP-100B)
1 Switch Panel (SP-200)
4 Screw, Hex #8 Self Drilling (CP4051-XK-12)
6 Terminal, 3/16” Insulated Fem. Q.C. (CP4062-K2545)
1 Instruction Manual (CP5061 This Manual)
Sound Hazard - Sound level from horn speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate horn without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
Do not operate horn without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)