Canon Microfilm Scanner 350 사용자 매뉴얼

29

■ ABOUT THE SOFTWARE ■

When the scanner is set to the Reader-Printer mode, all the set-
tings and operation of the scanner must be performed through the
operation panel on the main body. For how to operate the scan-
ner, see “Setting the scanner” (

➞P.33).

• The Reader-Printer mode is a mode in which the

scanner can perform the same functions as an
ananlog Reader-Printer does. In the Reader-Printer
mode, images scanned by the scanner can be di-
rectly printed out through a printer that is designated
by the CapturePerfect. (Note, however, that the
scanned images will not be saved.)

• In the case of multiple scanners connected to one

personal computer, only images scanned by one of
those scanners that is currently operating will be
printed out. (No special operation to select a scan-
ner is necessary.)

There are two ways to start up the Reader-Printer mode, one from
the CapturePerfect menu, and the other directly from a shortcut
(“Multi Scan Start”) registered in the program menu.

■ Setting the Reader-Printer mode
1. Select “Reader-Printer Mode Settings” in the “File” menu and

display the “Reader-Printer Mode Settings” dialog.

For the Reader-Printer Mode Settings, refer to the
CapturePerfect Help.

2. Click “OK” when settings are completed.

■ Starting up the Reader-Printer mode
1. Select “Reader-Printer Mode” in the “File” menu to start up the

Reader-Printer mode.

• When the Reader-Printer mode once starts up, the

CapturePerfect main screen is going to reside in the
task tray as the 

 icon.

• The number appearing on the 

 icon indicates the

SCSI ID that the scanner is connected to.

• All settings and operation of the scanner can mostly

be performed through the operation panel on the
main body.