Canon LV-X6 지침 매뉴얼

� Automatically Optimizing on RGB Image

Optimizing an RGB image automatically.
Press the AUTO PC button to optimize an RGB image automatically.

[Poor picture]

[Normal picture]

Press the AUTO PC button to fine-tune the computer image or to remove any vertical banding that might appear and
to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmer-
ing). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also
adjusts the clock phase to reduce video noise, dot interference or cross talk. (This is evident when part of your image
appears to be shimmering.)
This adjustment may be necessary when you connect your computer for the first time.

NOTE:
Some signals may not be displayed correctly or take time.
• The Auto PC adjustment function does not work for component, composite and S-video signals.
• If the Auto PC adjustment operation cannot optimize the RGB signal, try to adjust Horizontal/Vertical Position Clock and

Tracking manually. See page 

� Turning Up or Down Volume

Increase volume

Decrease volume

Sound level from the speaker can be adjusted.

TIP: When no menus appear, the SELECT 

 and 

 buttons on the projector cabinet work as a volume control.

Increase volume

Decrease volume