Avaya Bogen Universal Paging Access Module 설치 설명서
Trunk Port Connections - Page Port (cont'd)
7.
Connect PT and PR terminals and contact closure on UPAM to the paging system,
as shown in Section 3. Connect the N.O. and COM terminals to the control pair of
the amplifier, if required. Also, connect any background music source to the BGM
IN jack on the UPAM.
as shown in Section 3. Connect the N.O. and COM terminals to the control pair of
the amplifier, if required. Also, connect any background music source to the BGM
IN jack on the UPAM.
8.
Connect power supply + and - terminals to the +24V/48V and -24V/48V terminals
on UPAM, respectively. Plug the power supply into a grounded 110V AC wall
outlet.
on UPAM, respectively. Plug the power supply into a grounded 110V AC wall
outlet.
9.
Call the system and adjust the volume of the page using the paging system’s
amplifier volume control.
amplifier volume control.
10.
Hang up and adjust the background music level using the UPAM BGM VOL
control.
control.
11.
Call the system and adjust the volume of the pre-announce/confirmation tone, using
the UPAM TONE VOL control.
the UPAM TONE VOL control.
Figure 6. Trunk Port Connections - Page Port
[18]