Avaya Media Gateway G700 사용자 설명서
Manual installation of a new G700 with an S8300
534 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
6. Press F3 (Enter) to save your changes.
If properly administered, the G700 should register with the primary controller within 1–2
minutes. The IP Address, MAC Address, and Module Type fields are populated
automatically after the G700 media gateway registers with the server.
minutes. The IP Address, MAC Address, and Module Type fields are populated
automatically after the G700 media gateway registers with the server.
7. Type change media-gateway to view the Media Gateway screen.
Media Gateway screen (after registration with primary controller)
The media modules installed in the G700 are listed next to their slot numbers. Verify that a
G700 media gateway has been successfully added.
G700 media gateway has been successfully added.
To verify changes
1. At the SAT prompt, type list media-gateway.
Media-Gateway Report screen
change media-gateway 1
Page 1 of 1
MEDIA GATEWAY
Number: 1
IP Address: 135.9.41.150
Type: g700
FW Version/HW Vintage: 21.13.0 /0
Name: Swainsons
MAC Address: 00:04:0d:02:06:ca
Serial No: 012X06230551
Encrypt Link? y
Network Region: 1
Location: 1
Registered? y
Controller IP Address: 135.9.41.146
Site Data:
Slot Module
Type
Name
V1:
S8300
ICC MM
V2:
MM712
DCP MM
V3:
MM711
ANA MM
V4:
MM710
T1/E1 MM
V8:
V9:
list media-gateway
MEDIA-GATEWAY REPORT
Num
Name
Serial No/
IP Address/
Type NetRgn Reg?
FW Ver/HW Vint
Cntrl IP Addr
RecRule
1 LabA
01DR07128730
135.177.49.57 g700
1
y
21 .13 .0 /0
135.177.49.59
1
2 Data
MG2
02DR01130356
135.177.49.90 g350
1
n
11 .2
.0
/0
135.177.49.40
none