Avaya Media Gateway G700 사용자 설명서

 the full-path name of the media module firmware file in a format such as 

mm712v58.fdl, and 

 is the ip address of the S8300.

Two or three minutes will be required for most upgrades. The VoIP media module upgrade 
takes approximately 5 minutes. Screen messages indicate when the transfer is complete.

5. After you have upgraded all the media modules, verify that the new versions are present. 

At the MG-???-1(configure)# prompt, type show mg list_config 

The list of software appears.

6. In the TYPE column, find the particular media module (v1 through v4), then check the 

matching field in the FW VINTAGE column to see if it matches the planning documentation. 

Note:

Slot V1 can contain either a media module or the S8300, which will show as 
TYPE ICC

.

7. Check the VOIP FW column and row for slot v0 to see if the number matches the VoIP 

firmware identified in the planning documentation.

8. Type reset <module #> 

where <module #> is the number of the G700 in the stack. 

9. When the reset is finished, type show mm to verify the upgrade.

1. When the upgrade procedure is complete, go to the SAT session and release the board

Type release board vx 

where x is the slot number of the upgraded media module. 

2. Verify the response, 

Command Successfully Completed

SLOT  TYPE 

CODE

 SUFFIX  HW VINTAGE  FW VINTAGE  VOIP FW

---- ------ 

----- ------ ---------- ---------- -------

V0  G700 DAF1 A 

00 

21.25.0(A) 26

V1 ICC S8300 

A 

00 

5 

N/A

V2 DCP MM712 

A 

2 

5 

N/A

V3 ANA MM711 

A 

3 

16 

N/A

V4 DS1 MM710 

A 

1 

8 

N/A