Avaya 1.3 사용자 설명서

5. At the command prompt, enter the 

 command. 

The 

 command format is as follows:

where 

 is the name of an existing directory (such as 

 or 

) on which to mount the CD-ROM. (Note that the full pathname, beginning 

with a ’/’, is required.)

6. The system now displays a list of the packages in the spool file. Press <Enter> to 

select the nwtslib package.

7. Specify the transport type.

UnixWare clients can use either IPX/SPX or TCP/IP as their network transport. The 
system displays a list of transports and the following message:

library. (To access Windows NT, Windows 2000 or Windows XP 

Type "s" for IPX/SPX or "t" for TCP/IP; then press <Enter>.

Note:

This release of Telephony Services for Windows NT, Windows 2000, 
Windows XP only supports TCP/IP as a network protocol; you must select 
TCP/IP even though both options appear on the screen.

8. The 

 command displays the Telephony Services "readme" file, tslib.readme. 

This file contains information about changes that were made after the manuals were 
completed.

9. The installation is complete. Unmount the CD-ROM.

The 

 command format is as follows:

where 

device 

specifies the CD-ROM drive that contains the Telephony Services 

installation disk. You may now remove the CD-ROM.

Note:

If TCP/IP is selected for the transport type, a template file called /usr/lib/
tslibrc is created during installation. For more information, see