Avaya 1.3 사용자 설명서

Installing from the CD: 

1. Become super-user (root): 

2. Enter the root password when prompted.

3. Insert the Telephony Services CD-ROM into your workstation CD-ROM drive.

4. At the command prompt, mount the CD-ROM as follows:

mount -F cdfs -r /dev/cdrom/device /mountpoint

where device specifies the CD-ROM drive that contains the Telephony Services 
installation disk and mountpoint is the name of an existing directory (such as /cdrom1 
or /CD-ROM_1) on which to mount the CD-ROM. You can use the 

ls

 command to find 

the appropriate name for your system.

Desktop users may find it easier to mount the CD-ROM by double-clicking on the CD-
ROM icon in the "Disks-etc" folder.

5. At the command prompt, enter the 

 command as follows:

pkgadd -d /mountpoint/sdk/tsapi/unixware/nwtssdk.spl

where mountpoint  is as described above. (Note: the full pathname, beginning with a ‘/
’, is required.)

6. Select package to install.

The system now displays a list of the packages on the CD-ROM.

Press <Enter> to select the nwtssdk package.

7. Read the Telephony Services SDK "readme" file. 

The 

pg

 command displays the Telephony Services SDK "readme" file, tslib.readme. 

This file contains information about changes that were made after the manuals were 
completed. Read this information until you reach the end of the file.

8. The installation is complete. Unmount the CD-ROM as follows:

umount /dev/cdrom/device

where device is the same as in Step 3. 

You may now remove the CD-ROM.