Autodesk HP Workstation xw9400 사용자 설명서

BIOS and Firmwares

   

9

If there is any doubt about whether items contain factory default values, the following 
procedure restores default factory settings.

Press F10 while booting the workstation to enter the system BIOS.

From the File menu, select Default setup | Restore Factory Settings as 
Default

. 

Press F10 to accept the changes. 

Select Apply Defaults and Exit. 

This restores the original factory system defaults.

System configuration is done prior to delivery by an authorized technician. The following 
procedures may not be necessary, and are provided here for informational purposes only.

Boot Order, Hard Drive

Integrated SATA 

Integrated IDE

Advanced

OS Power Management, ACPI S3 
Support 

Disabled

Chipset / Memory, ECC Support Enabled

Chipset / Memory, Memory 
Scrubbing

Enable

Chipset / Memory, Memory 
Node Interleave

Enable

Chipset / Memory, PCI Serr# 
Generation

Enable

Chipset / Memory, Net 
Watchdog Timer

Enable

Chipset / Memory, ACPI Bus 
Segmentation

Disabled

Chipset / Memory, HPET

Enabled

I/O

Device Options, S5 Wake on LAN Disabled

Before installing Red Hat 4 Update 3, validate the BIOS Settings.