Atlantis Land 500 사용자 설명서

 

11

millisecond of computer clock times in a network of computers.   

NTP server name：Type the host name or IP address of the NTP server, up to 64 characters. 

Time zone：Select the time zone and time difference from Greenwich Mean Time in the area 

where the device is installed from the pulldown box. 

Reboot：Click this button to reboot the device. A confirmation dialogue will appear. Click OK 

to proceed. It takes about two minutes to reboot the device. 

Factory default：Click this button to reset the device to the factory default settings. A 

confirmation dialogue will appear. Click OK  to proceed, the network indicator on the device 

will start to blink. After completing adjustments to the default settings, the device will reboot 

automatically. Do not turn off the device until the device reboots. 

Backup setting data：Save the setting data of the device to a file. Click Save, and follow the 

instructions on the browser to save the setting data file to your specified location.   

Restore setting：Load the saved setting data of the device. Click Browse and select the file in 

which the setting data is stored. Click OK, and the device is adjusted according to the loaded 

data and restarted. 

Firmware update：Upgrade the device software. Click Browse  and select the file for 

upgrading. A confirmation dialogue will appear. Click OK to start upgrading. The device will 

reboot upon completion.