Atlantis A02-RA241-W54 사용자 설명서

                                                               ENGLISH

 

34 

 

These are configuration parameters: 

•  VPI: 0 or 1 (check with your ISP) 

•  VCI: 38 or 50 (check with your ISP) 

•  NAT:Enable 

•  Encapsulation: please use LLC Routed. If You have 

problem You have to check with your ISP about which 
Encapsulation Method is adopted. 

Select Use the following IP address 
•  IP Adress: Insert your Public IP 

•  Subnet Mask: Insert Netmask provided by ISP 

•  Gateway: Insert router Default Gateway 
Press Apply and then click on Save Config to Flash. 
Now You can check on  the section Status if connection is 
up and You can begin navigation.  For every other  problem 
refer to Manual or Multimedia Guide on attached cd-rom.