ATI Technologies ATI MULTIMEDIA CENTER 8.2 137-70480-10 사용자 설명서
92
Troubleshooting
Video problems ...
Problem
Suggested solution
Video is
unstable or
only black and
white
unstable or
only black and
white
Check that you are using the correct broadcast standard
format:
format:
•
See Broadcast Standard in
page 15. For proper operation, you must specify your
country in the TV Channels Initialization Wizard (see
country in the TV Channels Initialization Wizard (see
).
•
Check the quality of your incoming TV signal on another
receiver; bad reception may be the cause.
receiver; bad reception may be the cause.
•
Try connecting your tuner directly to the cable TV or
antenna source. Too many splitters in the cable will
degrade the signal.
antenna source. Too many splitters in the cable will
degrade the signal.
There is no
video or audio
video or audio
•
Ensure that your cable or antenna is connected.
•
Ensure that the video connector is set to the correct
source (see Connector in
source (see Connector in
•
Check that the audio and video connectors are securely
plugged into the correct jacks.
plugged into the correct jacks.
•
Check that your video card is securely seated in its slot.
Please refer to the user guide for the card location.
Please refer to the user guide for the card location.
Video
recording
stops
unexpectedly
recording
stops
unexpectedly
•
Video files are typically very large; ensure that you have
sufficient disk space.
sufficient disk space.
•
Ensure that you are recording to the correct hard disk
— click the Disk Space Settings button in Personal
Video Recorder settings (see
— click the Disk Space Settings button in Personal
Video Recorder settings (see
•
Disable screen savers while recording.
•
Disable Power management while recording.