AstroStart 60Cx 사용자 설명서
Units Setup
Use the Units Setup Page to customize measurement
units.
To access the Units Setup Page:
On the Setup Menu Page, highlight the
Units
icon, and press
ENTER.
Units
icon
• Position Format—sets the coordinates for the
system in which a particular location is shown.
The default format is latitude and longitude in
degrees, minutes, and thousandths of a minute
(hddd
o
mm.mmm).
• Map Datum—sets the description for
geographic location for surveying, mapping,
and navigation, and is not actually a map built
into the unit. The default setting is WGS 84.
The unit automatically chooses the best datum
based on your chosen format.
For more information about selecting position
.
• Distance/Speed—selects the unit of
measurement for speed and distance traveled.
• Elevation (Vert. Speed)—selects the unit of
measurement (Feet (ft/min), Meters (m/min),
or Meters (m/sec) to use for altitude and rate of
ascent.
• Depth—selects the unit of measurement
(Feet, Fathoms, or Meters) to use for depth.
(Requires interface to other devices or marine
chart data.)
• Temperature—selects the unit of measurement
(Fahrenheit or Celsius) to use for temperature.
GPSMAP 60Cx Owner’s Manual
6
M
AIn
M
enu
>
s
etuP
M
enu