Apex Digital GT2015DV 사용자 설명서
TV FUNCTIONS
(continued)
20
(continued)
Function Selection
After caIIing up the Pass Code Menu first, press the CH- / + buttons to highIight “Pass Code 6688”, and then “Enter Pass
Code - - - - ”appears on the screen. Press the ChanneI Number buttons to enter new pass code which you need enter
when caIIing up the ParentaI Guide Menu.
Notes:
1 If you forget the new pass code when turning on the ParentaI Guide Menu display, you may enter the initial pass
code 6688.
2 lf you wouldn' t like to set any pass code, press the CH- / + buttons to highIight Pass “Code ControI” and MENU
button to turn off the pass code setting display.
General Operation
2.To select a channel
1.To control volume
Press the VOL -/ + buttons to decrease or increase the volume.
1)
2)
Volume 20
Mute
While adjusting volume, hold down the F button, then press the
VOL-/+ buttons to decrease or increase volume by 4 levels.
VOL-/+ buttons to decrease or increase volume by 4 levels.
During normal play, press the MUTE button to eliminate the
sound until you press the VOL + or MUTE button again.
sound until you press the VOL + or MUTE button again.
Press the CH + button to choose higher-numbered channels and
the -CH button to choose lower-numbered channels.
the -CH button to choose lower-numbered channels.
Using the Channel Number buttons
To select a one -digit channel number
Press the 0 button, then press another Channel Number but-
ton (except 100+) to select a desired number.
To select a two -digit channel number
Enter a first-digit, then second-digit.
To select channel number between 100 and 125 in the Cable
mode
Press the 100+ button so that
ton (except 100+) to select a desired number.
To select a two -digit channel number
Enter a first-digit, then second-digit.
To select channel number between 100 and 125 in the Cable
mode
Press the 100+ button so that
“
1_ _” appears on the screen,
then enter the next digit one and two.
Press the RECALL button and the TV will directly skip back to
the previous channel.
Note:
the previous channel.
Note:
In the Video mode, pressing the RECALL button can return
to the TV mode.
to the TV mode.
1 Press the SCAN button so that “ Scan Off ” appear on the screen.
2 Press the SCAN button again so that “Scan On ”appear on the
2 Press the SCAN button again so that “Scan On ”appear on the
screen and the TV begins to scan from the current channel.
Note:
During scanning, pressing any button can interrupt scanning.
CH +
1)
2)
3)
MUTE
F
0
9
~
100+
RECAL
Scan On
0
1
18
12
1
124
9
CH -
VOL-
VOL+
4)
SCAN