Apex Digital HT-180 사용자 설명서

Connecting to a TV using an RF Modulator

Continued

Figure 3

Connection 3

Connecting the TV , unit, VCR,

RF Modulator and Cable or Satellite Box

1) Connect the three-terminal composite video

cable to the back of your Apex Home Theater

System . This cable has three prongs, one each

in yellow, red, and white. The yellow prong will go

into the jack labeled “Video Out”; the white prong

will go into the jack labeled “AUDIO L OUT”; the

red prong will go into the jack labeled “AUDIO R

OUT”.

2) Connect the opposite end of the composite

video cable into the back of the RF modulator.

Make sure to match up the colors correctly.

3) Connect a coaxial cable from the “OUT” jack

on the back of your satellite receiver to the “IN”

jack on the back of your VCR. The coaxial cable

is the one-wire, metal-ended type that you screw

onto the VCR.

4) Connect a coaxial cable from the “OUT” jack

on the back of your VCR to the “Antenna” jack on

the RF modulator.

Figure 2

Connection 2

Connecting the TV, unit, RF Modulator

and Cable or Satellite Box

1) Connect the three-terminal composite video

cable to the back of your Apex Home Theater

System . This cable has three prongs, one each

in yellow, red, and white. The yellow prong will go

into the jack labeled “Video Out”; the white prong

will go into the jack labeled “AUDIO L OUT”; the

red prong will go into the jack labeled “AUDIO R

OUT”.

2) Connect the opposite end of the composite

video cable into the back of the RF modulator.

Make sure to match up the colors correctly.

3) Connect a coaxial cable from the “Antenna

Out” jack on the back of your Satellite receiver

to the “Antenna” jack on the RF modulator. The

coaxial cable is the one-wire, metal-ended type

that you screw onto the Cable or Satellite Box.

4) Connect a coaxial cable from the “To TV” jack on the RF modulator to the

jack on the back of your TV.

5) Make sure your TV is set to the appropriate channel before using your

Home Theater System . In most cases, this is channel 3 or 4.

5) Connect a coaxial cable from the

“To TV” jack on the RF modulator to

the jack on the back of your TV.

6) Make sure your TV is set to the

appropriate channel before using

your Home Theater System . In most

cases, this is channel 3 or 4. Also

make sure that the VCR is set to

the appropriate channel, as well.

This selector is usually on the

back of your VCR. Consult your

VCR manual for further informa-

tion.

A P E X D I G I T A L

H T - 1 8 0