American Power Conversion 3-in-1 Wireless Mobile Router 사용자 설명서

The Port Forwarding Screen

5-4

The Port Forwarding screen is reached by the Port Forwarding link. The following is a sample screen.

This screen lists a number of pre-defined servers and allows users to define their own servers. Details of the selected server are shown 
in the Properties area. The following table describes the fields on the Port Forwarding Screen. 

Lists a number of pre-defined and user-defined services. Details of the selected service are shown in 

the Properties area.

Enables/Disables Port Forwarding for this service, as required.

Selects the computer to be used as the server for this service. The computer must be running the 

appropriate Server software.

If the computer uses a fixed IP address, and is not in the list, click here and add it using the PC Database 

menu option.

Selects the protocol (TCP, UDP or TCP/UDP) used by the service.

Enter the range of port numbers that the server software is configured to use.

Traffic from the Internet using this range of port numbers will be sent to the selected server. These ports 

are normally the same as the internal port numbers. If they are different, this computer will perform a 

mapping or translation function, allowing the server to use a different port range to the clients. Using 

this feature allows the server to distinguish traffic from the WAN from traffic on the local LAN by 

using the port number, rather than having to check IP addresses.

Deletes any user-defined servers, and sets the pre-defined servers to use their default port numbers.

Causes the Enable setting of all entries to be set Off.

Deletes the current server entry. Note that the pre-defined servers cannot be deleted; only those servers 

that are user-defined can be deleted.

Clears all data from the Properties area.