Alfa Romeo 147 사용자 매뉴얼

The speed memorised can be reduced in

two ways:

1) disengaging the device (for instance

pressing the brake pedal) and then memo-
rising the new speed (turning the ring (

B)

to (

+) for at least three seconds);

2) keeping the ring pressed (

B) at (–)

until reaching the new speed which will be
memorised automatically.

Move the ring (

A) to ON and take the car

to the required speed normally. Turn the ring
(

B) to (+) for at least three seconds, then

release it. The car speed is memorised and
it is therefore possible to release the acceler-
ator pedal.

The car will continue to travel at the mem-

orised constant speed until one of the fol-
lowing conditions takes place:

– pressing the brake pedal;

– pressing the clutch pedal;

– if the ASR, MSR or VDC systems cut in;

– with Selespeed transmission if a gear is

changed;

– inadvertent movement of the Selespeed

gear control lever to position 

N.

IMPORTANT In the case of need (when

overtaking for instance) acceleration is pos-
sible simply pressing the accelerator pedal;
later, releasing the accelerator pedal, the car
will return to the speed memorised previ-
ously.

If the device has been disengaged for ex-

ample pressing the brake or clutch pedal,
the memorised speed can be reset as fol-
lows:

– accelerate gradually until reaching a

speed approaching the one memorised;

– engage the gear selected at the time

of speed memorising (4th, 5th or 6th
speed);

– press the 

RES button (C).

The speed memorised can be increased

in two ways:

1) pressing the accelerator and then mem-

orising the new speed reached (turning the
ring to (

B) for more than three seconds);

or

2) momentaneously turning the ring (

B) to

(

+): each pulse of the ring will correspond to

a slight increase in speed (about 1.5 km/h),
while pressing continuously wull correspond
to a continuous speed increase. Releasing the
ring (

B) the new speed will be memorised

automatically.

001-057 Alfa 147 Q2 GB  4-07-2008  11:58  Pagina 50