AEM Music Mixer 2-Channel Pro DJ Mixer 사용자 설명서

TECHNICAL SPECIFICATIONS:

Inputs:

Line/Aux: 10k

input impedance, 5.6mV rms sensitivity for 1.0V output

Mic: 10k

input impedance, 1mV rms sensitivity for 1.0V output

Phono: 47k

input impedance, 0.9mV rms sensitivity @ 1kHz for 1.0V output

Outputs:

Master: 8.6V rms

Booth: 8.6V rms

Record: 1.0V rms

Headphone Amp: .5 watts / 47

, THD < 0.1%

Equalizer:

3-band Stereo Equalizer per channel, -30dB cut / +10dB boost

Signal to noise ratio

Line: 92dB (JIS-A)

Aux: 92dB (JIS-A)

Mic: 87dB (JIS-A)

Phono: 83dB (JIS-A)

Frequency Response

Line: 20Hz~20kHz 1dB

Aux: 20Hz~20kHz 1dB

Mic: 20Hz~15kHz 1dB

Phono: RIAA 0.5dB

Talkover attenuation: Maximum –19dB, minimum –16dB attenuation of main audio

Power consumption: 18 Watts typical, 22 Watts with full headphone output

Dimensions: 10” wide * 14” deep * 4.2” high

Weight: 6.0kg

Life rating:

Crossfader: >4,000,000 cycles

CH1, CH2 Line faders: >100,000 cycles

Fader Cuts buttons: >1,000,000 cycles

Misc. faders: >100,000 cycles

Effect circuitry:

Noise, Oscilattor: 0 to 3dB max level, oscillator has variable frequency square wave.

Stutter: variable on/off from a few 1/10ths of a second transforms to high pitched ringing.

Digitize: variable frequency sample/hold circuit.

Phaser: dual phaser with variable cutoff.

Band Pass, Band Reject filters: 4-pole sweepable butterworth filters.

Crossfader section circuitry:

Cut Time: 1.64msec min, 420msec max, full right = unlimited setting for maximum cut time

Cut Slope: 1.64msec min, 420msec max transition time between audio and cut position.

***Cut Time and slope both set to min will turn off cut function

Fader Cut buttons, fader start, crossfader/line1/line2 response:

1.64msec max delay initial response

1.64msec max transition time for crossfader/line1/line2.

***No delay in the audio path, delay is for the audio control only.

Output Resolution: 0.2dB typical with fader at 2/3 volume.