AEG CTV 4889 사용자 설명서

English

Overview of the main menu

System settings

General Setup (1)

Audio Setup Page (2)

Dolby Digital Settings (3)

Preference Page (4)

Password Setup Page (5)

DVB-T Settings (6)

NOTE:

Some of the menu settings are only available in stop mode (depen-
ding on the DVD).

TV Display

Here you can adapt the output of the DVD-Player to the TV-aspect.

Concerning the background: If you do not have a wide screen TV the
TV-aspect will be 4:3. However, most feature fi lms have an aspect of 16:9,
the image is therefore too wide for the TV-screen.

Here you can specify how the replay of the fi lm is to be adapted to the
playback device:

4:3 Panscan: You will only see the middle section of the fi lm. The bor-

ders will be cut off .

4:3 Letterbox: You will see the complete width of the fi lm. The fi lm is

thus reduced in size, whereby black bars appear below and above the
fi lm

16:9: Select this option if you use a wide screen TV for replay. Please

note that fi lms, that have been recorded with TV-aspect 4:3 can still
be replayed using aspect 4:3. This means, that replaying this fi lm will
not require the complete wide screen area of the television.

NOTE: The setting „4:3 Panscan“ is not supported by all DVDs.

Angle Mark (Camera Angle)

If the DVD contains sequences recorded from diff erent camera angles you
can use the ANGLE button (Fig. 3/13) to select the various camera angles.
This function is only available if the DVD contains scenes with various
camera angles.

Before you can use this function it has to be activated.

On: The angle symbol is shown on the screen.

Off : No angle symbol is shown on the screen.

OSD Language

Here you can select the language of the on-screen displays.

05-CTV 4889_GB.indd 68

08.09.2008 9:02:38 Uhr