ADIC Webcam 2.8 사용자 설명서

In the Password Field, type admin and click OK.

The initial StorNext GUI appears. You are prompted to start non-running components.

Click OK to start the StorNext components.

The Configuration Wizard screen is shown and guides you through configuration of the StorNext 
software.

Using the Configuration Wizard

The Configuration Wizard provides step-by-step instructions for configuring the StorNext software. 
Text for the active step is shown in a different color, and is followed by the word Completed after the 
step is done. The Configuration Wizard opens every time the StorNext GUI is refreshed until all of the 
configuration steps are completed. You can also launch the wizard at any time from the StorNext 
home page by selecting Configuration Wizard from the Config menu.

Each configuration step contains its own wizard that provides step-by-step guidance. For each 
configuration step, you must continue through all the related screens until the step is complete. For 
example, you must complete all the screens associated with Step 1: Enter License before you can 
continue to Step 2: Add File System. When you are finished with a step, click Done to continue to the 
next step. 

After you have completed a step, you can return to a previous step by clicking the step name. You 
can also clear all of your entries and restart the process from the very beginning by clicking Reset. 

Note

For information on changing your password or setting up additional users, 
refer to the StorNext System Administrator Guide.