ADIC SNC 5100 사용자 설명서
Service Port Connections
95
6-00020-02
SNC 5100
Connecting to the Service Port
The service port is an RS-232C Data Terminal Equipment (DTE) port,
configured at 19200 Baud, with 8 data bits, no parity and either hardware flow
control or Xon/Xoff flow control.
configured at 19200 Baud, with 8 data bits, no parity and either hardware flow
control or Xon/Xoff flow control.
The 9-pin connector is compatible with serial ports on PCs. A PC may be used
to connect to the service port, using a 9-pin to 9-pin null modem cable.
to connect to the service port, using a 9-pin to 9-pin null modem cable.
For connection to another system, such as a UNIX workstation, a different
cable or an adapter may be required.
cable or an adapter may be required.
Service Port Connections
The figure below shows the service port connections.
Figure 9 Service Port Pinout
Connections are listed in the following table.
Table 10: DB-9 RS-232 Connector Pin Assignments
Pin
Number
Signal Name
Abbreviation
Direction relative to
SNC 5100
1
Carrier Detect
CD
In
2
Receive Data
RD
In
3
Transmit Data
TD
Out
4
Data Terminal Ready
DTR
Out
5
Signal Ground
SG
-
6
Data Set Ready
DSR
In
7
Request to Send
RTS
Out
8
Clear to Send
CTS
In
9
Ring Indicator
RI
In