ADIC SNC 5100 사용자 설명서

This will start the ZMODEM transfer engine that transfers a single binary 
bootrom image file to POST using the service port. It should not be used to 
receive other kinds of binary image files. If the transfer is successful then 
POST will program the bootrom image into the FLASH memory device. 

While waiting for the file, POST will display:

**B000000023be50

At this point the operator may transfer the bootrom “.bin” file to POST using 
the ZMODEM protocol. Refer to terminal emulator documentation for details 
on how to do this. After the file is transferred, POST will display:

File transfer and update PASSED

ZMODEM Messages:

Writing to flash:MMMMMMMM-NNNN

MMMMMMMM is the address that is being written in FLASH memory and 
NNNN is the length of the image. At this point the operator should choose 
option “B”, Cold [B]oot from primary bootrom.” If errors are encountered, 
POST will display appropriate messages along with the line:

File transfer and update FAILED

This command will cause POST to display its version number, build date, the 
machine it was built on, and the user who built it. The display will look like:

POST version 0402.02 Built Apr 4 2001, 15:24:06 on TANGLEFOOT by

jimu

POST will flash the ERR LED along with the LEDs associated with any failed 
test. Refer to the LED assignments in the normal POST sequence. Error 
messages may also be displayed on the service port.