ADIC FastStor Mass Storage Device 사용자 설명서

30 

Keeping a drive clean is the single most important requirement for achieving and maintaining superior performance. Cleaning the 
head should always be performed as the first step if the CT field appears on the LCD. The tape head may be cleaned once a month, 
or when the CT field appears on the Operator’s Panel LCD. 

Some application packages feature an auto clean cycle. If your application supports an auto clean function, ADIC strongly 
recommends that you use it.  

ADIC recommends that you use the built-in AUTOCLEAN feature if your application does not support an auto clean cycle. 

However, the tape capacity of the FastStor is reduced to 6 tapes whenever AUTOCLEAN is enabled. 

Use a DLT cleaning tape to clean the drive heads. A cleaning cartridge, or a coupon for a free cleaning tape is shipped with your 
ADIC FastStor. 

 

Cleaning the head should always be performed as the first step if the CT field appears on the LCD. 

The cleaning cartridge is exhausted after it has performed 20 cleanings. The cleaning tape includes a label with 20 small boxes 

printed on it. Always place a check mark in a box each time the tape performs a cleaning. Replace the cleaning cartridge when 

it has performed 20 cleanings (all boxes will be checked).