Acoustic Energy A Ego 5 사용자 설명서
1. After properly connecting AEGO
P
5 to your audio sources and amplifier, plug in AEGO
P
5 ’s AC adapter to an AC outlet.
2. Turn on the power of AEGO
P
5 by pushing the POWER button on the front panel. Turn on the power of all audio
sources, amplifier, or powered subwoofer.
3. Installation is now complete, get ready to experience true Dolby Digital or DTS surround sound.
Note:
To prevent damage to speakers, when playing music or a movie, ensure the volume is set low initially.
Gradually turn the volume up to an appropriate level after the playback has started.
Connecting AEGOp5
(with 5.1 Theatre System)
7
Acknowledgments & Trademarks
All contents are subject to change at any time without
notice. No responsibility is assumed for its use; or for
infringements of patents or other rights of third parties
and no patent or license is implied hereby.
All trademarks are the property of their respective
owners. Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic “ and the double-D
symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. (c)1992 - 1997
Dolby Laboratories, Inc. All rights reserved.
Manufactured under license from Digital Theater
Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380,
5,978,762 and other worldwide patents issued and
pending. “DTS” and “DTS Digital Surround” are
registered trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2000 Digital Theater Systems, Inc.
All Rights Reserved.
FCC Compliance Statement
The equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and receiver.
■
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
which the receiver is connected.
■
Consult the dealer or an experienced radio/TV technician for help.
Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. Shielded cables and I/O cords must be used for this equipment to comply with
the relevant FCC regulations.
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. Shielded cables and I/O cords must be used for this equipment to comply with
the relevant FCC regulations.
6
POWER
OFF
AUTO
ON
When set to “AUTO”
the Aego system will
go in to standby mode
if no signal is detected
for a period of time
(10 minutes).
It will automatically
switch back on when
a signal is detected.
the Aego system will
go in to standby mode
if no signal is detected
for a period of time
(10 minutes).
It will automatically
switch back on when
a signal is detected.
Sub Level
This can be altered to
obtain preferred level
of bass.
This can be altered to
obtain preferred level
of bass.
Sub output
This output is available
to supply an auxiliary
subwoofer such as the
“Acoustic Energy
Aegis Compact Sub”.
This may be
recommended when
This output is available
to supply an auxiliary
subwoofer such as the
“Acoustic Energy
Aegis Compact Sub”.
This may be
recommended when
used in a large room.
Volume knob
This is the main volume
control for all channels.
When used with a
decoder it would
normally be set to
maximum, This enables
the Aego5 system to be
used with DVD players
that have a built in
decoder but no overall
volume control.
This is the main volume
control for all channels.
When used with a
decoder it would
normally be set to
maximum, This enables
the Aego5 system to be
used with DVD players
that have a built in
decoder but no overall
volume control.
AUX.
SUB.
SUB
LEVEL
Controls
MULTIPIN
Front
Right
Right
Rear
Right
Sub
Front
Left
Rear
Left
Centre
OPTICAL
IN
DIGITAL
IN
POWER
12V DC
12V DC
Left
Right
LINE IN
AUX 1
AUX 2
Developed And Manufactured By Videologic Systems.
ACOUSTIC ENERGY LIMITED,
16 BRIDGE ROAD, CIRENCESTER,
GLOUCESTERSHIRE GL7 1NJ
WWW.ACOUSTIC-ENERGY.CO.UK
16 BRIDGE ROAD, CIRENCESTER,
GLOUCESTERSHIRE GL7 1NJ
WWW.ACOUSTIC-ENERGY.CO.UK
Audio Out
Audio Out
CD Player
VCR
Games Consul
AEGO
P
5 Decoder
Subwoofer
Power
Surround Left (SL)
Surround Right (SR)
Centre Speaker
Left Speaker
Right Speaker
Phono Jack
Play
Rec
L
Audio Out
Digital
Coaxial
DVD Player
R
L
R
Laserdisc
Optical
L
R
L
R
FRONT
RIGHT
RIGHT
FRONT
LEFT
CENTRE
REAR
RIGHT
REAR
LEFT
LEFT
AUX.
SUB.
SUB.
SPEAKER OUTPUTS
SUB
LEVEL
POWER
MULTIPIN
INPUT
OFF
AUTO
ON