Dual 16-3267 사용자 설명서
21
The progressive-scan display presents 60 complete
frames per second, rather than the 30 frames per sec-
ond of interlaced scanning (ordinary normal TV sys-
tem). With nearly double the numbers of line, progres-
sive scan offers higher picture resolution and eliminates
bothersome motion artifacts those jagged edges on
moving objects.
frames per second, rather than the 30 frames per sec-
ond of interlaced scanning (ordinary normal TV sys-
tem). With nearly double the numbers of line, progres-
sive scan offers higher picture resolution and eliminates
bothersome motion artifacts those jagged edges on
moving objects.
To enjoy the full quality potential offered by pro-
gressive scan feature, a progressive scan TV
equipped with 480p input is required.
gressive scan feature, a progressive scan TV
equipped with 480p input is required.
1. Connecting COMPONENT VIDEO OUT
-
-
Use the Pr/Cr Pb/Cb Y (red / blue / green) cables,
to connect Pr/Cr Pb/Cb Y jacks to the correspond-
ing 480p video input jacks or cables as CR/CB/Y or
YUV on a TV.
to connect Pr/Cr Pb/Cb Y jacks to the correspond-
ing 480p video input jacks or cables as CR/CB/Y or
YUV on a TV.
2. Activating progressive scan
-
-
Access to setup menu, set video out to YUV (Please
refer to PAGE 11
refer to PAGE 11
“ VIDEO output setting ” for de-
tails.)
-
In the stop mode , press P/I and ENTER to switch
PROGRESSIVE mode.
PROGRESSIVE mode.
3. Deactivating progressive scan
-
-
Using the SETUP menu, set video out to S-VIDEO
(Please refer to PAGE 11
(Please refer to PAGE 11
“ VIDEO output setting ”
for details.)
-
In the stop mode , press P/I and ENTER to switch
PROGRESSIVE scan mode back to INTERLACE
mode.
PROGRESSIVE scan mode back to INTERLACE
mode.
Notes
• Complete these steps within a 5 second period to
• Complete these steps within a 5 second period to
switch modes.
• When the switch is successful, the relevant mes-
sage will be displayed on the televison screen.
• For some TV modes, may cause blank TV screen,
when progressive scan switch off. In such case,
unplug the CR/CB/Y connection.
unplug the CR/CB/Y connection.
Setting the sleep timer
Use this function to program the system to turn off
automatically after a specified amount of time. Press
SLEEP repeatedly, to select the following time
intervals in minutes:
automatically after a specified amount of time. Press
SLEEP repeatedly, to select the following time
intervals in minutes:
15
30
45
60
90
120
OFF
- When you have selected the specified time, the
“ SLEEP ” indicator lights on the television screen
and front panel display.
and front panel display.
- To reset the time, press SLEEP again to make
another selection.
- To check the remaining time before the system turns
off, press SLEEP. The remaining time will be
displayed on the television screen and front panel
for a few seconds.
displayed on the television screen and front panel
for a few seconds.
- To cancel the sleep function, press SLEEP until it
reaches OFF.
Special Functions
Special Functions
Special Functions
Special Functions
Special Functions
Activating PROGRESSIVE/INTERLACE mode
C
FR
FL
SUBW.
SR
SL
L
R
AUDIO OUT
DIGITAL OUT
OPTICAL
S-VIDEO
VIDEO
VIDEO OUT
Pr/Cr
Pb/Cb
Y
COAXIAL
COMPONENT
VIDEO OUT
Pr/Cr
Pb/ Cb
Y
D V D A UD IO O N LY
DOLBY/DTS