Drive Medical Design Baby Walker 10215RD-1 전단
always engage and disengage wheel locks on both
sides simultaneously.
sides simultaneously.
1. to Slow Down or come to a temporary Stop
— pull up slowly on the loop locks with four
fingers until unit slows down or comes to a
temporary stop.
2. to temporarily lock wheels in position — press
down on both loop locks with palms until you
hear a “click” that will tell you wheels are locked.
3. to Release wheel locks — push up on both loop
locks with palms of hand to original position.
— pull up slowly on the loop locks with four
fingers until unit slows down or comes to a
temporary stop.
2. to temporarily lock wheels in position — press
down on both loop locks with palms until you
hear a “click” that will tell you wheels are locked.
3. to Release wheel locks — push up on both loop
locks with palms of hand to original position.
assembly instructions
cautIon:
Do not attempt to adjust or operate
Rollator without carefully reading all instructions
in this manual.
in this manual.
1. First remove all contents from carton: backrest,
handle with tube, Rollator frame and basket.
2. open frame and slide padded backrest into
frame brackets making sure snap bottoms
protrude through holes.
3. unscrew tightening knob from handle and insert
handle tube into frame at desired height lining
up holes appropriately. Slide bolts through holes
from the inside and screw on tightening knob
until secure.
handle with tube, Rollator frame and basket.
2. open frame and slide padded backrest into
frame brackets making sure snap bottoms
protrude through holes.
3. unscrew tightening knob from handle and insert
handle tube into frame at desired height lining
up holes appropriately. Slide bolts through holes
from the inside and screw on tightening knob
until secure.
1. please make sure the Rollator is fully opened,
seat is down and the folding bar under seat is
locked in the down position.
2. be sure that both knobs are fully tightened and
are at equal heights. test Rollator for stability
before applying full weight to hand grips.
3. test the loop locks before operating the
Rollator. when wheels are locked (see
illustrations for locking and releasing locks
below), lock bar on rear wheels should prevent
wheels from turning. If the wheels turn while
brakes are locked, please take unit back to
dealer for adjustment. when locks are released,
the wheels should turn freely.
4. always lock loop locks before sitting and do not
use seat when unit is on an incline or
uneven ground.
5. Replace tires when significantly worn or
damaged.
6. Do not have anyone push you while you are
seated on the Rollator. this is a walking aid only
and is not to be used as a transportation device.
seat is down and the folding bar under seat is
locked in the down position.
2. be sure that both knobs are fully tightened and
are at equal heights. test Rollator for stability
before applying full weight to hand grips.
3. test the loop locks before operating the
Rollator. when wheels are locked (see
illustrations for locking and releasing locks
below), lock bar on rear wheels should prevent
wheels from turning. If the wheels turn while
brakes are locked, please take unit back to
dealer for adjustment. when locks are released,
the wheels should turn freely.
4. always lock loop locks before sitting and do not
use seat when unit is on an incline or
uneven ground.
5. Replace tires when significantly worn or
damaged.
6. Do not have anyone push you while you are
seated on the Rollator. this is a walking aid only
and is not to be used as a transportation device.
safety precautions
loop lock operation
orthodic
hand grips
loop locks —
Safest System
available
height
adjustable
wide
comfortable
Seat
Folding hinge
for portability
Sealed wheel
bearing for Smooth
operation
hanging basket
for Functionality
& Storage
backrest