Dish Hopper 사용자 설명서

Use the following remote control buttons to control a tuner or amplifier. When the remote 
control is set up as described on pages 71 and 78, press the AUX device mode button to 
set the remote to AUX mode. The AUX mode button will stay lit for two seconds to show 
you’ve set the remote to AUX mode. Make sure to keep the remote in AUX mode to use 
the following buttons.

When the remote control is set up to operate your TV, the VOLUME and MUTE buttons 
will adjust your TV volume by default. If you prefer the volume and mute functions of the 
remote control to adjust the volume of a remote-controllable tuner/preamp, audio receiver 
or amplifier device instead of the TV, this capability can be set up using AUX mode of the 
remote control. 

To set the remote to adjust the tuner/preamp or audio amplifier volume (steps 1-5 set up 
the remote control and steps 6-7 verify that the remote has been set up correctly):

Turns the

tuner/amplifier

on and off

Control tuner/amplifier

volume

To use the features described in this section, make sure

you are in AUX mode by pressing the AUX Mode button.

Channel up/down
with the Arrow buttons.
Change tuner/amplifier
inputs with the Select
button