Dish Hopper 사용자 설명서
Receiver Customization
85
Using Caller ID
To use the external hard-disk drive feature:
1
Purchase a USB 2.0 hard-disk drive from a consumer electronics retailer.
2
Connect the drive to one of the receiver’s three USB ports, making sure to follow any
connection instructions that came with the hard-disk drive.
Note: Currently, the receiver supports having one USB device connected at a time. If you
have a second USB device such as a flash drive or portable device connected to the
receiver, you should disconnect it before connecting the external hard-disk drive.
connection instructions that came with the hard-disk drive.
Note: Currently, the receiver supports having one USB device connected at a time. If you
have a second USB device such as a flash drive or portable device connected to the
receiver, you should disconnect it before connecting the external hard-disk drive.
3
If the hard-disk drive is compatible, you’ll see a pop-up message screen confirming the
device’s connection and asking if you want to manage its contents. Select Yes.
device’s connection and asking if you want to manage its contents. Select Yes.
4
Follow the on-screen prompts.
5
Once the external device is recognized, you’ll see a pop-up message asking if you want to
format the drive—formatting is necessary to store your recorded programs on the external
hard-disk drive. Note that selecting Yes will cause anything stored on the external hard-
disk drive to be erased, the drive to be formatted for use with your receiver, and then the
receiver to reboot. You can use the Manage Device option to view and manage programs
stored on the external hard drive. Use the Send to Device option to transfer programs
from your receiver to the external hard-disk drive. Copy protection for certain content may
apply. Visit our website at mydish.com/copyprotection for more information.
format the drive—formatting is necessary to store your recorded programs on the external
hard-disk drive. Note that selecting Yes will cause anything stored on the external hard-
disk drive to be erased, the drive to be formatted for use with your receiver, and then the
receiver to reboot. You can use the Manage Device option to view and manage programs
stored on the external hard drive. Use the Send to Device option to transfer programs
from your receiver to the external hard-disk drive. Copy protection for certain content may
apply. Visit our website at mydish.com/copyprotection for more information.
6
Press the MENU button and then highlight and select the Recordings Transfer tile to
transfer DVR content from your Hopper HD DVR to your external hard drive.
transfer DVR content from your Hopper HD DVR to your external hard drive.
U
SING
C
ALLER
ID
Caller ID displays on your TV if you subscribe to Caller ID from your local phone company.
To use this feature, make sure you have a phone line connected to the receiver, Caller ID
is enabled on your phone line, and that the Caller ID option is selected on your receiver.
To use this feature, make sure you have a phone line connected to the receiver, Caller ID
is enabled on your phone line, and that the Caller ID option is selected on your receiver.
Setting Up Caller ID Display
Use these instructions to enable or disable the Caller ID feature on your receiver:
1
Press the MENU button, highlight and select the Settings tile from the Main Menu screen.
2
Highlight and select Network Setup, and then Caller ID.