Dixon Aficio 1515 사용자 설명서

Error & Status Messages on the Display

13

Ethernet Board Error

An error has occurred in the 
Ethernet interface.

Turn off the main power 
switch, and back on again. If 
the message appears again, 
contact your sales or service 
representative.

Exceeded max. print size.

Press FormFeed/JobReset

The page images to be printed 
exceed the maximum print ar-
ea.

Press [JobReset] to change the 
paper tray settings, or press 
[FormFeed]

 to print regardless.

I/O buffer overflow.

The maximum size of the I/O 
buffer has been exceeded.

Increase the size of the I/O 
buffer through the Host Inter-
face menu.

Load paper in Tray #

There is no paper in the select-
ed paper tray.

# indicates the tray number.

Load the tray with paper.

NV-RAM Error

An error has occurred in the 
printer.

Turn off the main power 
switch, and back on again. If 
the message appears again, 
call your sales or service repre-
sentative.

Paper in Duplex Unit. Open 
cover and remove the paper.

There is a misfeed in the du-
plex unit.

Open the cover of the duplex 
unit, and remove the misfed 
paper.

Paper size/type mismatch.
Change settings to:

xxx yyy

There is no paper tray that 
matches the paper settings se-
lected under Auto Tray Select.

xxx indicates the tray number.

yyy indicates the paper size 
and the paper type.

Press [JobReset] to change the 
paper tray settings, or press 
[FormFeed]

 to print regardless.

For details about the paper 
tray settings, see General Set-
tings Guide.

Parallel I/F Error

An error has occurred in the 
parallel interface board.

Contact your sales or service 
representative.

Printer Font Error

An error has occurred in the 
font file.

Turn off the main power 
switch, and back on again. If 
the message appears again, 
call your sales or service repre-
sentative.

Print overrun.

The image data has been 
thinned out due to image com-
pression.

Increase memory capacity. 
When installing a memory 
module in the machine, con-
tact your sales or service rep-
resentative.

Problem:IEEE1394 board

An error may have occurred in 
the IEEE 1394 board.

Turn off the main power 
switch, and back on again. If 
the message appears again, 
contact your sales or service 
representative.

Problem:IEEE802.11b card

An error may have occurred in 
the IEEE 802.11b card.

Problem:IEEE802.11b board

An error may have occurred in 
the IEEE 802.11b board.